FANDOM


Conceptual Design Edit

Use a capture-and-hold circuit to only update the input to the 555 timer circuit when an 'enable' input is high.

Functional Description Edit

Input and output are buffered with opamp voltage followers. Large capacitor is used to hold voltage. Transistor is used as switch to close the circuit between input to holding capacitor when the enable is high.

Block Diagram Edit

voltage follower -> transistor, collector=input, base=enable + current-limiting resistor, emitter=holding cap -> holding cap -> voltage follower

Design Parameters Edit

hold voltage for up to a second, acquire voltage in 50ms

Design Implementation Edit

47uF cap, 22K current limiting resistor for enable input.

Performance Testing Edit

Quick and dirty. Hold time is fine, acquire time I hope will be fine.Transistor limits the range of the output voltage. Digital enable needs to be at Vcc.

Ad blocker interference detected!


Wikia is a free-to-use site that makes money from advertising. We have a modified experience for viewers using ad blockers

Wikia is not accessible if you’ve made further modifications. Remove the custom ad blocker rule(s) and the page will load as expected.